Repair & Change Pachislo Dwell Reel Buttons
Two Primary Button Forms
1. Dwell Button Assembly
2. Particular person Dwell Buttons
Dwell Button Assembly
All buttons are mixed into a single meeting. The general meeting is neatly faraway from the machine by doing away with two screws.
Each button has a connector that is associated to a predominant board on the meeting, that board has a connector that is associated to the Pachislo machine ..
Unplug the meeting connector, grab away the 2 screws and grab away the meeting from the machine.
Most often it’s doubtless you’ll then grab away the board from the meeting by both doing away with a screw, a couple of clips or each. Once the backs of the buttons are uncovered it’s doubtless you’ll grab away every by both unscrewing a plastic nut that holds it in space or by pressing on two clips that serve it in space.
In case your buttons hold clips, merely spend a dinky flat screwdriver. Press in on one clip quite whereas gently pushing the it via the front of the meeting. DO NOT FORCE IT. Exact loosen the foremost facet by downhearted the clip.
Now construct the identical with the other clip and it’ll moreover restful pop out the front of the meeting.
Particular person Dwell Buttons
The second form is the Particular person Dwell Button. On this case, they assign no longer seem like section of an meeting. Each is associated personally to the machine. Unplug them personally from the board and practice the identical directions to loosen the clips and push it out of the front of the machine.
The most out of the ordinary difficulty with buttons is that they become sticky and could well well both push in or push in and stick. To resolve this difficulty it’s doubtless you’ll moreover no longer wish to alter or even grab away them.
Exercise a silicone spray. Depress the button if that it’s doubtless you’ll mediate of. Spray a SMALL AMOUNT of silicone spray onto the corners of the button and wipe off the excess quickly. Work the button out and in for a couple of seconds to let the silicone work into the areas around the button.
This might occasionally likely be advanced. You won’t be in a space to come by contemporary buttons but some buttons from scrapped machines can be found on-line. You can be in a position to wish to no longer only match the button model and dimension, but you’re going to wish to compare the button connector.
There are masses of quite loads of styles of connectors and likewise you’re going to wish to compare the model and the preference of pins.